How does kodak easyshare button work

Turn the camera off by firmly pressing the power button located on top of the camera. Place the Philips 00 Found here screwdriver into the screw. Use plastic opening tools to slightly open the side of the case.

Insert a plastic opening tool and apply pressure to the internal three tabs at the top. Do not touch the terminals shown in the photo. These link to the capacitor which could shock you if not discharged. To discharge the capacitor follow this guide. Tool shown is Found here.

When putting back together, the button should be be oriented so that the green automatic mode points towards the power button. Cancel: I did not complete this guide. Badges: Fix Your Stuff Community Store. Difficulty Moderate. Steps Time Required 15 - 20 minutes. Sections 4. Flags 0. Introduction This guide demonstrates how to clean or replace the shutter button.

Step 1 Battery. Add a comment. Add Comment Cancel. Once your subject is in focus, press the shutter button down the remainder of the way to take a photo. Adjust your camera's ISO for different conditions. The ISO on your camera determines how sensitive your camera is to light. Upload pictures from your camera to your computer by using the included USB cable. Each Kodak EasyShare camera comes with a USB cable that can be used to connect your camera to your computer, as well as some basic photo editing software found on a CD in the box.

Kodak also makes docks for its digital cameras that you can leave connected to your computer at all times. With the dock, you would simply place your camera in the dock and pictures would be uploaded to your computer. Docks also have the added benefit of charging your camera's battery while pictures are being uploaded.

Home Hardware.